Artwork Guideline Checklist

We require VECTOR ART created in Adobe Illustrator or EPS format.

Important Note: A screenshout or design created in a photo/paint/word program is not vector art.
 
In addition, simply embedding or copying your image into  Adobe Illustrator, will not convert the image into Vector art format and will not be acceptable to produce a high-quality imprint.
Convert all fonts to paths, curves, or outlines.

Color Format

We take digital printing, all designs must be created in CMYK. Please convert any images or colors that use the RGB color space. All Pantone (PMS) colors must be converted to CMYK. Pantone and Spot colors are not supported in this application.

Image Resolution

For the highest quality print, make sure the image resolution is checked with 300dpi at least. Images with a resolution of lower dpi will look pixelated and blurry when viewed at 100%.

Barcodes

The minimum size for a barcode is 150%, roughly 2.2 inches in width. The height of the bars is less important for proper scanning, however we do recommend that they be at least.5" (12-inch) tall.

Fonts

Please consider increasing the font size to at least 10 for best readability. Printing fonts smaller than the recommended size may result in illegible results, especially if the font is thin.

Rich Black Color

If your art includes black, we recommend it's built as a rich black with 30 cyan (C), 0 magenta (M), 0 yellow(Y), and 100 black (K).